Products

How to use wrist blood pressure monitor

Wrist blood pressure monitors are portable and generally less expensive than upper arm monitors, it makes them become a popular way to take blood pressure at home .

But many people will doubt are wrist blood pressure monitors accurate enough compared to arm blood pressure monitors ? Clearly , it is accurate if people used exactly as the directed.

Below is our Wrist Blood Pressure Monitor DBP-2208 ‘s user guide for your learning.

23.03.31 quick start 1

23.03.31 quick start 2

 

Below are Tips for unit operation:

 

Battery Installation

Slide battery cover off as indicated by arrow.

Install 2 new AAA alkaline batteries according to polarity. Close battery cover.

Note: 1) Replace batteries when Low Battery Indicator appears on screen.

2)Batteries should be removed from device when not in operation for an extended period of time. Replace batteries when Low Battery Indicator " "appears on screen.

 

System Settings

With power off, press “SET” button to actuate system setting, the Memory Group icon flashes.

1.Select memory Group Wile in the System Setting mode you may accumulate test results into 2 different groups. This allows multiple users to save individual test results ( up to 60 memories per group). Press “M” button to choose a group setting: The test results will automatically store in each selected group.

2.Time/Date setting Press "SET" button again to set the Time/Date mode. Set the year first by adjusting the “M” button. Press "SET" button again to confirm current month. Continue setting the day, hour and minute in the same way. Every time the "SET" button is pressed, it will lock in your selection and continue in succession ( month, day, hour and minute)

3.Time Format Setting. Press SET button again to set the time format mode. Set the time format by adjusting the M button . EU means European Time. US means U.S Time.

4.Voice Setting Press “SET” button to enter voice setting mode. Set the voice format ON or OFF by pressing the “M” button.

5.Volume Settings Press "SET" button to enter volume setting mode. Set the voice volume by adjusting the "M" button. Smaller " " is for lower volume. There are six volume levels.

6.Saved Settings While in any setting mode, press " START/STOP " button to turn the unit off. All information will be saved.

Note: If unit is left on and not in use for 3 minutes, it will automatically save all information and shut off.

Our wrist sphygmomanometers have been sold all over the world for many years and have received unanimous praise after market testing. They are accurate in measurement ,fully capable of meeting the needs for home use .

23.03.31

 

 

Write your message here and send it to us

Supplier's popular products